VIPER Gen 3
&
4 (2003 - 2010)
PRODUCTS Main Menu
|
|
|
|
| HOME |
SHOP (Menus) |
Viper Photos | Viper Info | Customer Service | Viper Links | HELP | Bulletin Board | Contact |
|
Viper 4 (2008-2010)
Products Main Menu Viper 3&4 (2003-2010) Products Main Menu |
|
Performance ▼ |
| Engine |
|
To
Order:
Our Dodge Viper accessories may be ordered either with or
without a PayPal account. Simply add the Viper items you desire to your
cart, and upon checkout you can either sign-in to pay through your PayPal
account, or you may simply pay by credit card without having an account.
|
|
Part # |
Item | Picture | Price | Shipping+ |
| BGF-PMC-S-V3 |
PCM Upgrade - Let your Viper SRT10 (03-06) Loose! Take the Gloves Off!
+20 to 40HP Gain* Your Viper came from the factory with a lot more performance than your engine Powertrain Controller Module is programmed to let you have...... Why? Because of emissions standards, gas mileage, ect. You remove and send us your PCM insured to us and we send it back....ready to go for you to install! Average performance returns are 20 to 40 Horse Power Gains not including upgrade parts such as headers, exhausts, ect... This PCM Upgrade is designed for stock Vipers or Vipers with some modifications (mild cam, cold air, headers). Upgrades include: ► Revised Premium fuel & timing tables ► Rev limit raised to 6400 ► Skip shift off ► Cooling fans on 20 degrees cooler In addition, we can program in one or two additional after market modifications you've installed such as performance Headers or Exhaust, removed Cats, turbo charger, and more. Programming performed by the nations leading experts in this PMC Programming with over 18 years experience. * Many other engine programming services available - just ask us. In regards to this service: Note: Mechanical/Electrical performance parts listed or sold through B&G Chrysler Specialists, Inc. cannot be used on vehicles used on public streets or highways. These parts may be used only on vehicles used solely in sanctioned off-highway events. No other applications are intended or implied Note: B&G PCM Modifications are for OFF-ROAD use only, and sold "as is" unless otherwise noted with no implied warranty! Additionally PCM upgrades may affect the emissions characteristics of the vehicle. If you install PCM Upgrade and your vehicle consequently fails state or local I/M emissions test, including any test required to maintain or renew your vehicles registration, or if your vehicle is subject to a emissions recall, B&G inc. nor emagineit Inc. is not required to repair your vehicle, and you may be required to remove the PCM Upgrade at your own expense in order to obtain repairs necessary to pass the I/M test or to perform the recall. * Horse power gains are within the engine performance curve at certain power settings. |
Smoking...  Note: We will call you with specific information we will need once you order. |
$ 469.95
2-3 week delivery If you are having trouble ordering online: Please call us at 352 688 8160 |
$ 9.95
We welcome our many Overseas Customers!
|
|
JU-P4510172-AB |
Viper SRT-10 (2003-2006) MOPAR
RACING Performance Engine
Controller Part to be installed as a set with Racing Engine Controller and Race Cam. Designed for the racing Viper only. Will not meet emission standard for road use. • This Race Engine Controller optimizes fuel/air tables for peak performance without catalytic converters, removes the skip shift feature (found on the production model), and is calibrated for premium pump fuel (91 octane minimum) • Designed and tuned to be used in conjunction with the MOPAR Performance 3 Inch Race Exhaust JU-P4510176 (above) and Race Camshaft JU-P4510171 (below). • MOPAR Performance Parts are sold as is, with no warranty IMPORTANT: You must have your engine Controller Re-programmed (we offer this service see top of this page) ...OR... Highly recommended to be installed Professionally with the Racing Engine Controller JU-P4510172-AB and the Racing Cam JU-P4510171 together and Racing Performance Exhaust JU-P4510176 or an after market performance exhaust which removes the Catalytic Converters. Does not fit 2008 Viper |
|
$ 449.95
2 week delivery If you are having trouble ordering online: Please call us at 352 688 8160
|
$ 8.95
We welcome our many Overseas Customers! |
|
JU-P4510171 |
Viper SRT-10 (2003-2006) MOPAR
RACING Performance Camshaft Part to be installed as a set with Racing Engine Controller and Race Cam. Designed for the racing Viper only. Will not meet emission standard for road use. • Camshaft offers 6-8 horsepower increase • Cam lift = 0.320" I/0.320"E. Duration at 0.050" = 220.00 I/230.5 E. Cam Centerline = 117° after top dead center • Designed and tuned to be used in conjunction with Race Engine Controller JU-P4510172-AB and 3" Race Exhaust JU-P4510176 (both parts65 Dodge Viper SRT-10 • MOPAR Performance Parts are sold as is, with no warranty IMPORTANT: You must have your engine Controller Re-programmed (we offer this service see top of this page) ...OR... Highly recommended to be installed Professionally with the Racing Engine Controller JU-P4510172-AB and the Racing Cam JU-P4510171 together and Racing Performance Exhaust JU-P4510176 or an after market performance exhaust which removes the Catalytic Converters. Does not fit 2008 Viper |
|
$ 829.95
2 week delivery If you are having trouble ordering online: Please call us at 352 688 8160
|
$ 29.95
We welcome our many Overseas Customers! |
| RR-RR-MRG2054 |
Dodge Viper (2003-2006) Performance Crankcase Breather
Assembly Oil pressure and ventilation is very important when it comes to the performance and life of your engine. This breather assembly screws right into the oil cap location on the valve cover and provides superior ventilation over the factory setup, greatly reducing the possibility of oil seepage, gasket failure and leaks. The aluminum bung screws into the stock location of the oil cap and has integrated o-rings to seal it. The chrome breather then pushes into the bung, and the set screw tightens down, so the breather will not move. To add oil to your engine, simply remove the breather, leaving the bung in place. No modifications needed, quick and easy install. Perfect for stock and highly modified engines! |
|
$ 98.95
1-2 week delivery
If you are having trouble ordering online: Please call us at 352 688 8160 |
$ 7.95
We welcome our many Overseas Customers! |
|
JU-5007510 |
Dodge Viper Valve - Intake, 2.02" diameter head Stainless Steel valves offer improved durability. Standard stem length (5.726") with oversize head diameters. Swirl-polished under-head area, chromed stem and hardened tip. Part includes one valve head NOTE: Cylinder Head no longer available through MOPAR. |
 |
$ 39.95
1-2 week delivery If you are having trouble ordering online: Please call us at 352 688 8160 |
$ 6.95
We welcome our many Overseas Customers! |
| JU-5007511 |
Dodge Viper Valve - Exhaust, 1.60" diameter head Stainless Steel valves offer improved durability. Standard stem length (5.726") with oversize head diameters. Swirl-polished under-head area, chromed stem and hardened tip. Part includes one valve head NOTE: Cylinder Head no longer available through MOPAR. |
|
$ 39.95
1-2 week delivery
If you are having trouble ordering online: Please call us at 352 688 8160 |
$ 6.95
We welcome our many Overseas Customers! |
| JU-P4510169 |
Dodge Viper SRT-10 (2003-2005) Light Weight Flywheel High-strength alloy steel flywheel is a direct replacement for stock SRT-10 part and uses production clutch assembly. Reduction of 9.4 lbs. (31%) in flywheel mass, and 39% flywheel rotating inertia. No release bearing changes, crank trigger changes or calibration required. |
 |
$ 944.95
2 week delivery If you are having trouble ordering online: Please call us at 352 688 8160 |
$ 39.95
We welcome our many Overseas Customers! |
2005-2010
copyright
TheViperStore.com a HotCarAccessories, inc. site
