DODGE Viper SRT-10 (2003-06) Diamond Mesh Top Hood Vent Grills -10pc
PART # ACC-972042
INSTALLATION INSTRUCTIONS 

Included:  10 x Stainless Steel Laser Cut Top Dash Grilles; 2 x Adhesive Promoter Packs

1.       Thoroughly scrub clean the lower areas inside each vent hole with alcohol to remove any and all road grime and dirt. Then swipe all ten areas with the adhesive promoter provided. 

2.       Each section will install in exactly the same way as another. Before you actually stick anything take a few moments to practice setting the grill sections. This will help you see for yourself just how they are intended to install and also to familiarize yourself with the procedure.  

3.       Now that you have a good idea how and where the grills install set each section in place allowing the clear release liner to fold over creating and available pull tab. Once each grill is in the perfect position pull the release tab completely out exposing the adhesive then press along the tabs length to set the grill. TECH TIP: The use of an o ring pick hook or small right angle pick will be very helpful to pull the grill sections nice and tight to the outer edge before you pull the tab.