|
This Frame has opened up into a New Window
Dodge Viper SRT-10 I-Phone
"Fangs" (2003-10) Covers - front &
back
ACC-972025
Included: Front and Back I-Phone
Covers, small button cover (optional)
Installation Instructions:
1. First clean the back and front surfaces of you phone thoroughly.
Put Windex or rubbing alcohol on a soft cloth (not directly on the phone)
and wipe clean.
2. Take the front cover and without taking the backing off, set it on
your phone and ensure it lines up and fits properly. Be sure the cut
outs line up correctly. You may use the circle button cut out to mount
on top of your round button or not - it's optional.
3. Once you are satisfied with the fitment peel off the red liner
exposing the sticky take. Carefully line up the cover with your phone
face. Gently set the stainless steel cover with sticky side down on
your phone. Make any last fine adjustments. Then press the top
firmly all across its surface to ensure a good bond.
4. Repeat this process for
the back side cover.
Questions?
352 688 8160 M-F
www.TheViperstore.com
|
