VIPER UPGRADE PRODUCTS


Search Tips

This Frame has opened up into a New Window

DODGE VIPER
Gen I & II (92-02) Inner DOOR SILLS
PART #DVIS204 (Brushed Finish) patent pending and
PART #DVIS205 (High Polished ) patent pending

  INSTALLATION INSTRUCTIONS

Items Included:     2- Doorsills;  2- Adhesive Promoter 

Note:  Your new sills come to you with a protective liner.

PLEASE NOTE THIS IS A PERMANENT INSTALLATION AND THE NEW DOORSILLS CANNOT BE REMOVED WITHOUT DAMAGING THEM. 

Your new doorsills come to you with a protective liner. DO NOT remove the liner until step 5. 

  1. Thoroughly clean the surface first with soap and water then with household isopropyl alcohol.
     
  1. Then swipe the same area with the adhesive promoter (provided). This promoter will guarantee a good permanent bond.
     
  1. It may be necessary to fit these sills by squeezing or opening them to insure a proper fit.
     
  1. When you are satisfied with the fit, remove the red liner from the attachment tape and press firmly.

IT IS VERY IMPORTANT THAT YOU SLOWLY INSERT THE SILLS INTO PLACE. THE ATTACHMENT TAPE IS VERY RELIABLE AND IT MIGHT BE A GOOD IDEA TO MAKE A COUPLE OF TEST FITS BEFORE PULLING THE RED LINER! 
YOU HAVE ONLY
ONE SHOT AT THIS SO GO SLOWLY!
 

  1. Once in place remove the protective liner. Repeat steps 1-5 for the opposite doorsill.

This Frame has opened up into a New Window

Copyright 2005 - 2022

The Viper Store
a HotCarAccessories site

Not Affiliated with Dodge, Chrysler or it's divisions