DODGE Viper II Clutch Fluid Cover Instructions

PART # DVCF301  

INSTALLATION INSTRUCTIONS

Your new grille vents come to you with a protective liner. Do not remove liner until installation is complete.

ITEMS INCLUDED:

1-Stainless Clutch Fluid Cover     1-Pack of Adhesive Promoter

Your new covers come to you with a protective liner. Do not remove liner until installation is complete.

1.      Thoroughly clean the large flat area adjacent to the clutch fluid reservoir with household rubbing alcohol to remove and road grime and dirt. Then swipe this area with the adhesive promoter provided.

2.      Place the new cover in position and check the overall fit and location. Although your new cover comes to you pre shaped you may want to make any adjustments by hand so that you achieve a nice contoured fit. Once you are satisfied with the fit simply remove the cover once again and peel the red release liner from the back of the cover and carefully place back into position and press firmly to set.

3.      Remove protective liner.

If any questions occur during installation, please contact admin@theViperStore.com

Note: Care must be taken when cleaning your new cover. It is a good idea to lightly dust your cover with a clean soft cloth first in order to prevent any particles from scratching it. Then wipe (using a new clean soft cloth) with a good quality streak free glass cleaner.
 

    

2005-2012 copyright
TheViperStore.com is a HotCarAccessories site