DODGE VIPER Gen II COWL PLATES

DODGE VIPER Gen II COWL PLATES - 2PC.

PART # DVCC302

INSTALLATION INSTRUCTIONS

Parts Included: 2- Cowl Plates Right & Left

NOTE: Your new covers come to you with a protective liner. Do not remove until installation is complete. Your new covers come to you with a protective liner. Do not remove until installation is complete.

Scrub the surfaces to be mounted with household rubbing alcohol first to remove all road grime and dirt. Then swipe the area once with the adhesive promoter provided.

Carefully place each plate into position to check the overall fit and also to familiarize yourself with just how each panel is to be inserted. Although your new covers come to you preformed it may be necessary to adjust the covers by hand in order to achieve a nice contoured fit. Once this is done simply peel the red release liner from the back of each cover and press them firmly into position.

Remove protective liner.

If any questions occur during installation please contact us at admin@theviperstore.com