|
BEL-AA-FULLSYSTEM-04/05 |
Dodge Ram SRT10 2-dr or 4-dr Quad Cab (2004-06)
High Performance
COMPLETE Exhaust System
Best exhaust system you can
buy! Complete
stainless High Performance System from the engine manifold all the way back
to the tail pipes. Includes high flow CAT's and performance Muffler.
Header Features (Belanger 5510):
- Dyno tuned and track tested long tube
Tri-Y Headers.
- Laser cut 5/16" header plates.
- Mandrel bent 1 3/4" port matched D-
ported equal length primary tubes.
- Primary tubes constructed of
aluminized tubing run 50% cooler
than stainless steel stock exhaust.
- 3" collectors.
- High temperature Jet Hot coating
included.
- Comes complete with Gaskets,
Hardware, and Header Hookups.
- Ceramic Cats with heat shield
Mid Pipes with High Flow Cat's Kit Features:
- 3" high flow catalytic converters
are fully heat shielded to run much
cooler than stock cats.
- Headers and Mid Pipes bolt
directly to stock cat back or any
aftermarket exhaust.
- Complete bolt on system, no
cutting or welding required.
Cat-Back:
(2006: MMRP single Tip or 2004-05 Magnaflow Dual Tip)
Fits directly after your catalytic converter,
which stays right in its stock location
- Includes MBRP Cat Back Single Tip part # AA-S5122409
(fits 2006)
or Magaflow
Double Tip AA-2472409
(2004-2005).
- 3" Pipe
- 4" polished, double-wall, slash-cut, stainless steel
tips
- 5 x 8 x 24" Muffler
|
FULL COMPLETE SYSTEM!
|
$ 2,649.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 199.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BEL-5510 |
Dodge Ram SRT10 2-dr (2004-06) Performance
Headers with Mid-Pipes, includes High Flow Cat's
Best exhaust system you can
buy! All stainless steel High Performance exhaust
headers and mid-pipes with High Flow Cat's.
Header Features:
- Dyno tuned and track tested long tube
Tri-Y Headers.
- Laser cut 5/16" header plates.
- Mandrel bent 1 3/4" port matched D-
ported equal length primary tubes.
- Primary tubes constructed of
aluminized tubing run 50% cooler
than stainless steel stock exhaust.
- 3" collectors.
- High temperature Jet Hot coating
included.
- Comes complete with Gaskets,
Hardware, and Header Hookups.
Mid Pipes with High Flow Cat's Kit Features:
- 3" high flow Catalytic converters
are fully heat shielded to run much
cooler than stock cats.
- Headers and Mid Pipes bolt
directly to stock cat back or any
aftermarket exhaust.
- Complete bolt on system, no
cutting or welding required.
|
|
$ 1,926.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 139.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BEL-5509 |
Dodge Ram SRT10 2-dr (2004-06) Performance
Cat back Headers only
Best exhaust system you can
buy! All stainless steel High Performance exhaust headers. T-304
Stainless steel.
Header Features:
- Dyno tuned and track tested long tube
Tri-Y Headers.
- Laser cut 5/16" header plates.
- Mandrel bent 1 3/4" port matched D-
ported equal length primary tubes.
- Primary tubes constructed of
aluminized tubing run 50% cooler
than stainless steel stock exhaust.
- 3" collectors.
- High temperature Jet Hot coating
included.
- Comes complete with Gaskets,
Hardware, and Header Hookups.
|
|
$ 1,659.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
$ 95.95
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
AA-2472409 |
Dodge Ram SRT10 2-dr or 4-dr (2004-05) Performance
Cat Back Exhaust System.
High performance cat-back exhaust system for the
RAM SRT10 2004 & 2005 only.
- Cat-Back:
fits directly after your catalytic converter,
which stays right in its stock location. You keep your
existing Cat's.
- Magnaflow part # 15832
- 3" Pipe
- 4" polished, double-wall, slash-cut, stainless steel
tips
- 5 x 8 x 24" Muffler
|
2004 & 2005 ONLY
**Does not fit 2006 RAM SRT10 |
$ 695.00
2 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 69.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
AA-S5122409 |
Dodge Ram SRT10 2-dr or 4-dr (2004-2005) Performance
Cat Back Exhaust System.
High performance cat-back exhaust system.
T-304 stainless steel: high chromium and nickel content; the most
corrosion-resistant material in the industry.
Features
- Free-flowing exhaust bolsters horsepower, torque and
even fuel economy
- Custom crafted for your specific year, make and model
vehicle
- Smooth mandrel-bent tubing reduces turbulence,
backpressure and restrictions
- Powered by MBRP flow-through mufflers for an
aggressive rumble without excessive noise
- Choose from up to 7 powerful series’ for your custom
set up
- Available in single or dual systems, plus rear or
side exits (depends on vehicle)
- Built from either T304 stainless, T409 stainless or
aluminized steel (depends on kit)
- All components are hand welded and jig assembled for
a precision fit
- No-weld, bolt-on design uses factory mounts for easy
installation
- MBRP includes all necessary hardware, clamps, hangers
and instructions
- Your MBRP Performance Exhaust System is backed by an
industry-leading warranty (varies by kit type)
Description
Scrap that power-choking factory exhaust
and let your ride run wild with the MBRP Performance Exhaust System.
Fine-tuned for your specific vehicle, MBRP Exhaust kits are custom
engineered to deliver massive blasts of free-flowing power and that
unmistakable MBRP rumble.
For a truly customized set up, you choose from up to 7 performance
systems and 3 metal types (most vehicles). Whether it’s a monstrous MBRP
diesel exhaust or a gas-burning MBRP cat-back exhaust system, your
vehicle gets huge power gains, improved throttle response and a throaty
roar. And, if you can keep your foot off the floor, you might save a few
MPG, too.
The included MBRP performance mufflers are designed to deliver the deep
tone without the cab drone heard in lesser systems. Along with the
performance mufflers, all kits feature mandrel bent tubes, high-quality
clamps and top-notch hardware. And, select kits even include
mirror-polished stainless steel tips. Just take a look at our MBRP
exhaust reviews and it’s easy to see that MBRP is the choice for the
true enthusiast.
|
Fits all - 2004-2006 RAM SRT10
2004-2005 Dual Tips
2006 Single Tip
|
$ 695.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 69.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
|
|
|
|
|
|
BBE-FTRU-0439 |
Dodge Ram SRT10 2-dr (2004-06) Performance
Long Tube Headers, 1-3/4"
5 into 1 Collectors
Handmade in America
Designed by Billy Boat the Legendary
Indy 500 Racer and his company B & B.
Known throughout the Viper community as the best performance exhaust systems
you can buy for the Dodge RAM SRT-10.
Performance
for your SRT-10 begins with the long tube
stainless steel headers. Header design and
technology incorporates the correct firing
sequence which pairs exhaust ports together
for more efficient exhaust scavenging,
improved torque and increased horsepower.
All B&B Performance Exhaust cat back and
header systems are tuned to match the
application. Providing the perfect
combination of performance, sound and style
is what we do. Since exhaust is all we do,
we have to do it better. All B&B products
are precision built as a direct replacement
for stock exhaust components including
hardware and gaskets.
No machining, no cutting or welding means
easy installation.
|
Super High Performance!
product may vary from picture(s)
 |
$1,874.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 94.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BBE-FTRU-0445 |
Dodge Ram SRT10 2-dr (2004-06) Front
Pipes with High Flow CAT's to fit
to factory manifold.
Handmade in America
This system is designed to replace your four
factory low-flow Cats with two HIGH-Flow High Performance Cats. If you
are keeping your factory exhaust system (not getting aftermarket headers)
this will bolt right up to that.
Designed by Billy Boat the Legendary
Indy 500 Racer and his company B & B.
Known throughout the Viper community as the best performance exhaust systems
you can buy for the Dodge RAM SRT-10.
Sometimes too much is never
enough. If the brazen performance of the factory stock
SRT-10 Ram isn't enough, Billy Boat has your poison; a
direct replacement header-back exhaust system. Producing
dyno-proven increases of 39 horsepower and 46 lb.-ft of
torque max , this is the ultimate exhaust system for the
Viper-powered Ram. Manufactured from 3” premium T-304
stainless steel, the header-back system features integrated
metal high-flow catalytic converters and mandrel bending for
an uninterrupted exhaust flow.
If you’re looking for
something slightly more tame, Billy Boat also offers a 50
state emission legal, 3” cat-back system producing a max 18
horsepower and 24 lb.-ft of torque. Mandrel bent from the
same premium grade stainless steel, this system is
upgradeable to include the front section with the high-flow
cats. Completing the system are twin 4” fully-polished
double wall tips for an aggressive yet stylish look. Both
exhaust systems offer astonishing performance gains and a
deep, commanding sound that is only found in a Billy Boat
Performance Exhaust.
|
product may vary from
picture(s)
|
$ 829.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 79.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BBE-FTRU-0444 |
Dodge Ram SRT10 2-dr (2004-06) Front
Pipes without High Flow CAT's to fit to factory manifold.
Handmade in America
This system is designed to Remove your four
factory low-flow Cats. You cut out your mid-pipes with your four cats
and install this system. Designed to bolt up to existing factory
exhaust pipes that are left.
Designed by Billy Boat the Legendary
Indy 500 Racer and his company B & B.
Known throughout the Viper community as the best performance exhaust systems
you can buy for the Dodge RAM SRT-10.
Sometimes too much is never
enough. If the brazen performance of the factory stock
SRT-10 Ram isn't enough, Billy Boat has your poison; a
direct replacement header-back exhaust system. Producing
dyno-proven increases of 39 horsepower and 46 lb.-ft of
torque max , this is the ultimate exhaust system for the
Viper-powered Ram. Manufactured from 3” premium T-304
stainless steel, the header-back system features integrated
metal high-flow catalytic converters and mandrel bending for
an uninterrupted exhaust flow.
If you’re looking for
something slightly more tame, Billy Boat also offers a 50
state emission legal, 3” cat-back system producing a max 18
horsepower and 24 lb.-ft of torque. Mandrel bent from the
same premium grade stainless steel, this system is
upgradeable to include the front section with the high-flow
cats. Completing the system are twin 4” fully-polished
double wall tips for an aggressive yet stylish look. Both
exhaust systems offer astonishing performance gains and a
deep, commanding sound that is only found in a Billy Boat
Performance Exhaust.
|
product may vary from
picture(s)
|
$ 369.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 69.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BBE-FTRU-0446 |
Dodge Ram SRT10 2-dr (2004-06) Front
Pipes with High Flow CAT's to fit
to B&B
Handmade in America
This system is designed to replace your four
factory low-flow Cats with two HIGH-Flow High Performance Cats. This
will bolt right up to the B&B Headers.
Designed by Billy Boat the Legendary
Indy 500 Racer and his company B & B.
Known throughout the Viper community as the best performance exhaust systems
you can buy for the Dodge RAM SRT-10.
Sometimes too much is never
enough. If the brazen performance of the factory stock
SRT-10 Ram isn't enough, Billy Boat has your poison; a
direct replacement header-back exhaust system. Producing
dyno-proven increases of 39 horsepower and 46 lb.-ft of
torque max , this is the ultimate exhaust system for the
Viper-powered Ram. Manufactured from 3” premium T-304
stainless steel, the header-back system features integrated
metal high-flow catalytic converters and mandrel bending for
an uninterrupted exhaust flow.
If you’re looking for
something slightly more tame, Billy Boat also offers a 50
state emission legal, 3” cat-back system producing a max 18
horsepower and 24 lb.-ft of torque. Mandrel bent from the
same premium grade stainless steel, this system is
upgradeable to include the front section with the high-flow
cats. Completing the system are twin 4” fully-polished
double wall tips for an aggressive yet stylish look. Both
exhaust systems offer astonishing performance gains and a
deep, commanding sound that is only found in a Billy Boat
Performance Exhaust.
|
product appearance may vary from picture(s)
|
$ 829.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 79.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BBE-FTRU-0447 |
Dodge Ram 2-dr SRT10 (2004-06) Front
Pipes without High Flow CAT's to fit to B&B
Handmade in America
This system is designed to Remove your four
factory low-flow Cats. You cut out your mid-pipes with your four cats
and install this system. Designed to bolt up B&B exhaust system.
Designed by Billy Boat the Legendary
Indy 500 Racer and his company B & B.
Known throughout the Viper community as the best performance exhaust systems
you can buy for the Dodge RAM SRT-10.
Sometimes too much is never
enough. If the brazen performance of the factory stock
SRT-10 Ram isn't enough, Billy Boat has your poison; a
direct replacement header-back exhaust system. Producing
dyno-proven increases of 39 horsepower and 46 lb.-ft of
torque max , this is the ultimate exhaust system for the
Viper-powered Ram. Manufactured from 3” premium T-304
stainless steel, the header-back system features integrated
metal high-flow catalytic converters and mandrel bending for
an uninterrupted exhaust flow.
If you’re looking for
something slightly more tame, Billy Boat also offers a 50
state emission legal, 3” cat-back system producing a max 18
horsepower and 24 lb.-ft of torque. Mandrel bent from the
same premium grade stainless steel, this system is
upgradeable to include the front section with the high-flow
cats. Completing the system are twin 4” fully-polished
double wall tips for an aggressive yet stylish look. Both
exhaust systems offer astonishing performance gains and a
deep, commanding sound that is only found in a Billy Boat
Performance Exhaust.
|
product appearance may vary from picture(s)
|
$ 349.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 69.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BBE-FTRU-0440 |
Dodge Ram SRT10 2-Dr Cab (2004-06) Performance
Cat Back System
with 4" double wall Tips. Deep Rumble sound!
Handmade in America
This system gives you a low throaty deep rumble!
Designed by Billy Boat the Legendary
Indy 500 Racer and his company B & B.
Known throughout the Viper community as the best performance exhaust systems
you can buy for the Dodge RAM SRT-10.
Sometimes too much is never
enough. If the brazen performance of the factory stock
SRT-10 Ram isn't enough, Billy Boat has your poison; a
direct replacement header-back exhaust system. Producing
dyno-proven increases of 39 horsepower and 46 lb.-ft of
torque max , this is the ultimate exhaust system for the
Viper-powered Ram. Manufactured from 3” premium T-304
stainless steel, the header-back system features integrated
metal high-flow catalytic converters and mandrel bending for
an uninterrupted exhaust flow.
If you’re looking for
something slightly more tame, Billy Boat also offers a 50
state emission legal, 3” cat-back system producing a max 18
horsepower and 24 lb.-ft of torque. Mandrel bent from the
same premium grade stainless steel, this system is
upgradeable to include the front section with the high-flow
cats. Completing the system are twin 4” fully-polished
double wall tips for an aggressive yet stylish look. Both
exhaust systems offer astonishing performance gains and a
deep, commanding sound that is only found in a Billy Boat
Performance Exhaust.
|
product appearance may vary from picture(s)
|
$1,429.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 89.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
BBE-FTRU-0440/0442 |
Dodge Ram SRT10 4-Dr Cab (2004-06) Performance
Cat Back System
with 4" double wall Tips. Deep Rumble sound!
Handmade in America
This system gives you a low throaty deep rumble!
Designed by Billy Boat the Legendary
Indy 500 Racer and his company B & B.
Known throughout the Viper community as the best performance exhaust systems
you can buy for the Dodge RAM SRT-10.
Sometimes too much is never
enough. If the brazen performance of the factory stock
SRT-10 Ram isn't enough, Billy Boat has your poison; a
direct replacement header-back exhaust system. Producing
dyno-proven increases of 39 horsepower and 46 lb.-ft of
torque max , this is the ultimate exhaust system for the
Viper-powered Ram. Manufactured from 3” premium T-304
stainless steel, the header-back system features integrated
metal high-flow catalytic converters and mandrel bending for
an uninterrupted exhaust flow.
If you’re looking for
something slightly more tame, Billy Boat also offers a 50
state emission legal, 3” cat-back system producing a max 18
horsepower and 24 lb.-ft of torque. Mandrel bent from the
same premium grade stainless steel, this system is
upgradeable to include the front section with the high-flow
cats. Completing the system are twin 4” fully-polished
double wall tips for an aggressive yet stylish look. Both
exhaust systems offer astonishing performance gains and a
deep, commanding sound that is only found in a Billy Boat
Performance Exhaust.
Includes additional extension pipe.
|
product appearance may vary from picture(s)
 |
$1,689.00
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 89.95
based on zip code
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
|
|
|
|
|
|
RR-RR-CC-2.5R |
Dodge Ram SRT10 (2004-06) Catalytic Converters, Stainless Steel, Metallic Substrate / pair, 2.5"
I/O - 17-20 HP Gain!
Add 17-20 horsepower! Metallic substrate, 200 cel per inch for super high
flow, 4" diameter small stainless steel body, GREAT price! 2.5" IN / OUT.
This cats include slip on end pipes on both sides.
NOTE: You will need to provide and weld together extra pipe after
removing your four factory low-flow Cat's. |
product may vary from picture(s) |
$ 399.95
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160
|
$ 39.95
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here
15 lbs
|
|
RR-RR-CC-3R |
Dodge Ram SRT10 (2004-06) Catalytic Converters, Stainless Steel, Metallic Substrate / pair, 3" I/O -
17-20 HP Gain!
Add 17-20 horsepower! Metallic substrate, 200 cel per inch
for super high flow, 4" diameter small stainless steel body, GREAT price! 3"
IN / OUT
Almost half the price of other cats with identical features! Our super high
flow catalytic converters feature 200 cel per inch metallic substrates that
withstand extreme temperatures and vibrations that would melt ceramic
catalysts! Far superior to OEM cats and reduce interior temperatures
dramatically. The small bullet design allows the 4 inch diameter, stainless
steel case to fit in very tight applications while resisting corrosion.
Fully welded/spun construction eliminates seams that can leak or open under
stress. Prep-welding available, upon request, for direct fit installations.
Sold in pairs but available singular, at half the price, for other
applications. Please call, with exhaust specifications, for all prep-welding
orders.
This cats include slip on end pipes on both sides.
NOTE: You will need to provide and weld together extra pipe after
removing your four factory low-flow Cat's.
|
product may vary from picture(s)
|
$ 399.95
2-3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160
|
$ 39.95
UPS Ground
We welcome our many Overseas Customers!
More
Shipping Info Click Here
15 lbs |
|
O2-SIMSX2 |
Dodge RAM SRT-10 (2004-06) Performance exhaust CAT
O-2 Simulator-Spacer.
Set of 2
Takes less than 10 minutes to install this small O2
Simulator.
If you have modified your RAM SRT10's system or installed performance CAT's
or exhaust system you will get an engine code light on. About
99.9% time this tends to be the rear most O2 sensor at or after the CAT.
With a modified or performance exhaust system the O2 sensor will receive a
higher temperature and a higher flow rate than stock (unless you have tuned
engine PCM). This is causing your engine controller to read that the
exhaust system is out of balance throwing an engine light code.
This O2 Simulator works by removing the troublesome O2 sensor from the
direct exhaust flow and provide your engine controller with the expected
exhaust balance - thus allowing your engine to run at its optimum.
This O2 Spacer (Simulator) is screwed on to your existing O2 sensor and the
assembly is replaced into the O2 bung (connection) on your exhaust.
This is an easy inexpensive fix that is very easy to install. No
soldering or splicing involved.
NOTE 1: Requires a 2 inch clearance from
your exhaust pipe.
NOTE 2: You must have a working O2 Sensor and bung connection.
|
Stop your Engine Light
Code.
Easy installation!
Non-electronic O2 Simulator (Spacer)
Commonly asked questions and answers
Click Here
|
$ 79.95
1-2 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160
|
$ 9.95
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
O2-SIMS-90X2 |
Dodge RAM SRT-10 (2004-06) Performance exhaust CAT
O-2 '90° LOW Profile' Simulator-Spacer. For tight spaces.
Set of 2
Extreme Low Profile Banjo
Style Right Angle Spacer, Mounts in Any Direction.
Designed for narrow space exhaust pipe. The O-2 Sensor will mount at a
right angel from your exhaust pipe.
Takes less than 10 minutes to install this small O2
Simulator.
If you have modified your RAM SRT10's system or installed performance CAT's
or exhaust system you will get an engine code light on. About
99.9% time this tends to be the rear most O2 sensor at or after the CAT.
With a modified or performance exhaust system the O2 sensor will receive a
higher temperature and a higher flow rate than stock (unless you have tuned
engine PCM). This is causing your engine controller to read that the
exhaust system is out of balance throwing an engine light code.
This O2 Simulator works by removing the troublesome O2 sensor from the
direct exhaust flow and provide your engine controller with the expected
exhaust balance - thus allowing your engine to run at its optimum.
This O2 Spacer (Simulator) is screwed on to your existing O2 sensor and the
assembly is replaced into the O2 bung (connection) on your exhaust.
This is an easy inexpensive fix that is very easy to install. No
soldering or splicing involved.
NOTE 1: Requires only a 1 inch clearance from
your exhaust pipe.
NOTE 2: You must have a working O2 Sensor and bung connection.
|
Stop your Engine Light
Code.
Easy installation!
Non-electronic O2 Simulator (Spacer) - Low Profile
Commonly asked questions and answers
Click Here |
$ 99.95
1-2 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160
|
$ 9.95
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
|
|
|
|
|
(2006)
JU-P5153639
|
Dodge RAM SRT-10 (2006) MOPAR
HIGH Performance Stainless
Steel Cat-back Exhaust
Discontinued by Dodge only 1 Left
Give your Viper RAM the
power and sound it's capable of!
Fits 2 door cab short bed only.
Made by Borla this single rectangle, rolled, angle cut
rear 2.5" pipe. High Polished tail pipe as shown.
If you’re looking for a little meaner rumble, a MOPAR Stainless Steel
Performance Exhaust
System is the answer.
These Cat-Back Exhaust Systems are installed utilizing
all existing OEM mounting locations.
8.3L Engine, SRT-10, Low Restriction.
|
Grab some extra Horse
Power!
|
$ 889.95
price can change without notice
3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 99.95
based on zip code
UPS Ground
66lbs
61" x 17" x 14"
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
(2004-05)
JU-P4510856 |
Dodge RAM SRT-10 (2004-05) MOPAR
HIGH Performance Stainless
Steel Cat-back Exhaust
Discontinued by Dodge only 1 Left
Give your Viper RAM the
power and sound it's capable of!
Fits either 2 door or 4 door cab and short bed only.
Made by Borla this single rectangle, rolled, angle cut
rear 2.5" pipe. High Polished tail pipe as shown.
If you’re looking for a little meaner rumble, a MOPAR Stainless Steel
Performance Exhaust
System is the answer.
These Cat-Back Exhaust Systems are installed utilizing
all existing OEM mounting locations.
8.3L Engine, SRT-10, Low Restriction.
|
Grab some extra Horse
Power!
|
$ 879.95
price can change without notice
3 week delivery time
If you are having trouble
ordering online: Please call us at 352 688 8160 |
Approximately
$ 99.95
based on zip code
UPS Ground
66lbs
61" x 17" x 14"
We welcome our many Overseas Customers!
More
Shipping Info Click Here |
|
|
|
|
|
|
