|
This Frame has opened up into a New Window
DODGE VIPER Gen II
VENT Box Trim Plates 2-pc
PART # DVVB308
INSTALLATION INSTRUCTIONS
NOTE: Your new
covers come to you with a protective liner. Do not remove until installation
is complete.
-
Clean the top surface of the vent box with household rubbing alcohol first
to remove all dirt and grime then swipe the area once with the adhesive
promoter provided.
-
Before permanently attaching place your new trim plates into position to
check placement and over all fit. Although the plates are relatively flat
you will need to gently form them by hand in order to achieve a nice
contoured fit. Once this has been done simply peel the red release liner
from the back of each plate and firmly press them into position.
-
Remove the protective liner.
If
any questions occur during installation please contact us at
admin@theviperstore.com
 
|
