VIPER UPGRADE PRODUCTS

This Frame has opened up into a New Window 

DODGE VIPER TAG FRAME Gen I & II
PART #DVRT104 (2001&2002) patent pending
PART #DVRT105(1994-2000) patent pending

                                                          INSTALLATION INSTRUCTIONS
Items Included:
Tag Frame                                                2- Screw Sockets
1- Keyhole Cover                                      2- Chrome Screw Covers
2- Stainless Screws 

1.  Remove your current license plate.
NOTE: Your stock plate screws will not be reused. 

2.  You will notice two Velcro strips on the backside of your new tag frame. Peel the liner off of these before positioning. This Velcro will eliminate any vibrations.  

3.  Be sure to position the frame over the two attachment holes and screw it down using the two stainless screws and screw sockets (provided). BE CAREFUL NOT TO OVER TIGHTEN. Snap chrome screw covers (provided) over the screw sockets. Push in keyhole cover. 

Note:  Care must be taken when cleaning your cover. It is a good idea to lightly dust your cover with a clean soft cloth first in order to prevent any particles from scratching it. Then wipe (using a new clean soft cloth) with a good quality streak free glass cleaner. 

This Frame has opened up into a New Window