VIPER UPGRADE PRODUCTS

This Frame has opened up into a New Window

DODGE VIPER Gen II BRAKE BOOSTER COVER
PART # DVB303
INSTALLATION INSTRUCTIONS

Parts Included:  1-Stainless Brake Booster Cover

NOTE: Your new covers come to you with a protective liner. Do not remove until installation is complete.

1. Your new booster cover comes to you preformed however it will be necessary to perform some additional shaping by hand in order to achieve a nice tight fit. Do this by simply squeezing the cover into a smaller diameter then the factory booster. Once this is done place the new cover over the booster from the front brake fluid reservoir and gently force the cover into position. Although it should not be necessary you may want to secure the new cover from shifting by applying a golf ball size blob of 100% clear household silicone directly to the top of the factory brake booster before sliding the new cover into position.
    

2. Remove protective liner. 

If any questions occur during installation please contact us at admin@theviperstore.com   

This Frame has opened up into a New Window